-
3. Too much or too little stabilizer The role of the stabilizer is to inhibit degradation or to reac... -
Second, the extrusion process is unreasonable 1. Excessive or insufficient plasticization of materia...
-
good news! good news! —— According to the relevant regulations of the State “High-tech Enterprise Ce...
-
2021-06-03Хорошие новости Хорошие новости —— Согласно соответствующим нормативным актам Государственного #171;...
-
Abstract: This paper introduces the design and debugging of soft and hard co-extruded PVC profile mo...
 Scan our WeChat official account
|